Glass Product Inspection

1 Scope
This standard specifies the classification, requirements, test methods, inspection rules, marking, packaging, transportation, and storage of colorless transparent float glass.
This standard applies to externally sourced ordinary clear sheet glass, tempered glass, laminated glass, wired glass, silver mirror glass, gray glass, and crystal glass.
2 Normative References
The provisions contained in the following standards constitute the provisions of this standard through reference in this text. At the time of approval of this standard, the versions indicated were valid. All standards are subject to revision, and parties using this standard should explore the possibility of using the latest versions of the following standards.
GB/T 1216-1985 Outside Micrometers (neq ISO 3611:1978) GB/T 2680-1994 Glass in Building—Determination of Light Transmittance, Solar Direct Transmittance, Total Solar Energy Transmittance and Ultraviolet Transmittance and Related Glazing Factors (neq ISO 9050:1990) GB/T 8170-1987 Rules for Rounding off of Numerical Values JB/T 7979-1995 Feeler Gauges
3 Classification
3.1 Glass is classified by use into cabinet grade, enclosure grade, and cashier grade.
3.2 Glass is classified by thickness into the following types: 2mm, 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm, 15mm, 19mm, 29mm.
4 Requirements
4.1 Glass shall be square, rectangular, or special-shaped. The allowable deviations for length and width dimensions shall comply with the provisions of Table 1. Table 1 Allowable Dimensional Deviations (mm)

4.2 The allowable thickness deviation of glass shall comply with the provisions of Table 2. The thickness variation on the same piece of glass shall be 0.1mm for thicknesses of 2mm and 3mm; and 0.3mm for thicknesses of 4mm, 5mm, 6mm, 8mm, and 10mm.
4.3 The appearance quality of the glass shall comply with the provisions of Table 3. Table 2 Allowable Thickness Deviation (mm)